ASTM A519 Tube

Product Details:

Aesteiron Steels LLP, is involved in offering a wide range of ASTM A519 Gr 1335 Carbon Steel in Tube. AISI 1335 alloy steel is used in machined components.

ASTM A519 Gr 1335 Chemical Composition
Carbon; 0.33-0.38
Manganese; 1.60-1.90
Phosphorus; 0.035max
Sulfur; 0.040max
Silicon; 0.15-0.35
Iron; 97.3-97.92

Product Details:

Aesteiron Steels LLP, is ASTM A519 Grade 1050 Carbon Steel Tube. ASTM A519 Gr 1050 Tube is suitable for machinery parts, fluid transportation, stress part of automobile tractor. ASTM A519 Gr 1050 has a medium carbon & tensile steel with good strength, toughness & wear resistance.

ASTM A519 Gr 1050 Chemical Composition
Carbon; 0.47-0.55
Manganese; 0.60-0.90
Sulfur; 0.050
Phosphorous; 0.040
Iron; 98-46-98.92

ASTM A519 Gr 1050 Mechanical Properties
Tensile Strength; 690Mpa, 100000psi
Yield Strength; 580Mpa, 84100psi
Elongation (in 50 mm); 10%

Product Details:

ASTM A519 Gr 1045 Carbon Steel is a medium tensile steel. Its characteristics is good weldability, good machinability & high strength. ASME SA519 Gr 1045 is used for industries such as fertilizer, petroleum, central-station, boiler, power station, shipping military, chemical industry, environment protection, traffic, food industry, medical equipments and so on.

ASTM A519 Gr 1045 Chemical Composition
Carbon; 0.42-0.50
Manganese; 0.60-0.90
Phosphorus; 0.040max
Sulfur; 0.050max
Iron; 98.51-98.98 

ASTM A519 Gr 1045 Mechanical Properties
Ultimate Tensile Strength; 565Mpa, 81900psi
Yield Tensile Strength; 310Mpa, 45000psi
Elongation (in 50mm) ; 16%
Reduction of Area; 40%

Product Details:

Aesteiron Steels Pvt Ltd, is  ASTM A519 Gr 1040 Tube Suppliers in India. ASTM A519 Gr 1040 Steel has a higher carbon content for greater strength than the lower carbon alloys. It is hardenable by heat treatment, quench and tempering to develop 150 to 250 ksi tensile strength.

ASTM A519 Gr 1040 Applications: Cold heated parts, Couplings, Crankshafts

ASTM A519 Gr 1040 Chemical Composition
Carbon; 0.37-0.44
Sulfur; 0.050max
Phosphorus; 0.040max
Manganese; 0.60-0.90
Iron; 98.6-99.0

ASTM A519 Gr 1040 Mechanical Properties
Tensile Strength Mpa(psi) ; 620(89900)
Yield Strength Mpa(psi) ; 415(60200)
Elongation (in 50mm) ; 25%

Product Details:

Aesteiron Steels LLP, is ASTM A519 Gr 1035 Tube Suppliers in India. ASTM A519 Grade 1035 is used for the hydraulic cylinder of heavy machinery, excavators & forklifts. AISI 1035 Carbon Steel is a water resisting carbon steel whose wear resistance & hardenability is increased by the addition of small quality of chromium.

ASTM A519 Gr 1035 Chemical Composition
Carbon; 0.31-0.38
Sulfur; 0.050max
Phosphorus; 0.040max
Manganese; 0.60-0.90
Iron; 98.63-99.09

ASTM A519 Gr 1035 Mechanical Properties
Ultimate Tensile Strength; 585Mpa; 84800psi
Yield Tensile Strength; 370Mpa; 53700psi
Elongation (in 50mm); 30%
Reduction Area; 53%

Product Details:

Aesteiron Steels LLP, is ASTM A519 Gr 1020 Tube Suppliers in India. ASTM A519 Gr 1020 is made as per ASTM A519/ASME SA519 standards Seamless Ferritic Alloy Steel Pipe. It is useful for High Temperature service.

ASTM A519 Gr 1020 Chemical Composition
Carbon; 0.18-0.23
Sulfur; 0.050max
Phosphorus; 0.040max
Manganese; 0.30-0.60
Iron; Bal

ASTM A519 Gr 1020 Mechanical Properties
Tensile Strength; 420Mpa, 60900psi
Yield Strength; 350Mpa, 50800psi
Elongation (in 50mm); 15%

ASTM A519 Pipe Types
ASTM A519 standard pipe
ASTM A519 1020
Alloy Steel Mechanical Tubing A519
ASME A519 1020 alloy steel pipes
ASTM seamless alloy pipe
Seamless alloy pipe ASTM A519 1020
ASTM A519 1020 seamless pipe
Alloy steel tube A519 1020
High pressure boiler pipe ASTM A519 1020
ASME A519 1020 alloy steel tubes

Product Details:

Aesteiron Steels LLP, is ASTM A519 Gr 1018 Tube Supplier in India. ASTM A519 Gr 1018 is among the most commonly available grades available in the world. It is widely available in cold finished rounds, squares, flat bar and hexagons. Despite its unimpressive mechanical properties, the alloy is easily formed, machined, welded and fabricated.

ASTM A519 Gr 1018 Chemical Composition
Carbon; 0.15-0.20
Manganese; 0.60-0.90
Phosphorus; 0.040max
Sulfur; 0.050max
Iron; Bal

ASTM A519 Gr 1018 Mechanical Properties
Tensile Strength; 440Mpa, 63800psi
Yield Strength; 370Mpa, 53700psi
Elongation(in 50mm); 15%

Product Details:

ASTM A519 Gr 1017 Carbon Steel is a medium low carbon steel, which has good welding property & slighty better machinability, compared to the lower carbon steels. A519 Gr 1017 Carbon Steel is used for line pipe boring applications.

ASTM A519 Gr 1017 Chemical Composition
Carbon; 0.14-0.20
Sulfur; 0.050max
Phosphorus; 0.040max
Maganese; 0.30-0.60
Iron; 99.11-99.56

ASTM A519 Gr 1017 Mechanical Properties 
Tensile Strength Mpa(psi); 405(58700)
Yield Strength Mpa(psi); 340(49300)
Elongation in 50mm; 18%
Reduction of area; 40%

Product Details:

ASTM A519 Grade 1015 carbon steel is a medium-low carbon steel, which has good welding property & slightly better machinability, compared to the lower carbon steels.

ASTM A519 Gr 1015 Chemical Composition
Carbon; 0.14-0.20
Sulfur; 0.050max
Phosphorus; 0.040max
Manganese; 0.30-0.60
Iron; 99.11-99.56

ASTM A519 Gr 1015 Mechanical Properties
Tensile Strength Mpa(psi); 405(58700)
Yield Strength Mpa(psi); 340(49300)
Elongation (in 50mm); 18%
Reduction area; 40%

Product Details:

ASTM A519 Gr 1010 Tube is a plain carbon steel with 10% carbon content. It has relatively low strength but it can be quenched & tempered to increase strength. AISI 1010 carbon steel is mostly used in the annealed or case hardened condition. However, it can also be heat treated, quenched and tempered but the cost for performing these processes are very high.

ASTM A519 Gr 1010 Applications: 1010 carbon steel is primarily used for applications such as cold headed fasteners & bolts.

ASTM A519 Gr 1010 Chemical Composition
Carbon; 0.080-0.130
Phosphorus; 0.040max
Sulfur; 0.050max
Manganese; 0.30-0.60
Iron; 99.18-99.62 

ASTM A519 Gr 1010 Mechanical Properties
Tensile Strength Mpa(psi); 365(52900)
Yield Strength Mpa(psi); 305(44200)
Elongation(in 50mm); 20%

Product Details:

Aesteiron Steels Pvt Ltd, is the known ASTM A519 Gr 1008 Tube Suppliers, which can be easily welded & processed utilising standard fabrication practices for austenitic stainless steel & nickel based alloy.

ASTM A519 Grade 1008 Chemical Composition
Iron; 99.31-99.7
Manganese; 0.30-0.50
Carbon; 0.10max
Sulfur; 0.050max
Phosphorus; 0.040max 

ASTM A519 Grade 1008 Mechanical Properties
Tensile Strength; 340Mpa, 49300psi
Yield Strength; 285Mpa, 41300psi
Elonagtion(in 50mm); 20%

Product Details:

Aesteiron Steels Pvt Ltd, is ASTM A519 Gr 1017 Tubes Suppliers in India. ASTM A519 Gr 1017 is a medium low carbon steel, which has good welding property & slighty better machinability, compared to the lower carbon steels.

ASTM A519 Grade : ASTM A519 Gr 1008, ASTM A519 Gr 1010, ASTM A519 Gr 1015, ASTM A519 Gr 1017, ASTM A519 Gr 1018, ASTM A519 Gr 1020, ASTM A519 Gr 1022, ASTM A519 Gr 1025, ASTM A519 Gr 1026, ASTM A519 Gr 1030, ASTM A519 Gr 1035, ASTM A519 Gr 1040, ASTM A519 Gr 1045, ASTM A519 Gr 1050, ASTM A519 Gr 1335, ASTM A519 Gr 1524,ASTM A519 Gr 1541

ASTM A519 Gr 1017 Chemical Composition
Carbon; 0.14-0.20
Sulfur; 0.050max
Phosphorus; 0.040max
Maganese; 0.30-0.60
Iron; 99.11-99.56

ASTM A519 Gr 1017 Mechanical Properties
Tensile Strength Mpa(psi); 405(58700)
Yield Strength Mpa(psi); 340(49300)
Elongation in 50mm; 18%
Reduction of area; 40%

Product Details:

ASTM A519 Grade 1541 Tubings are ductile and strong Tubings with long wearing properties. Carbon steel has medium tensile strength & it is widely used in general engineering. ASTM A519 Gr 1541 offers excellent work hardening properties.

ASTM A519 Gr 1541 Chemical Composition
Carbon; 0.36-0.45
Manganese; 1.30-1.65
Phosphorus; 0.040
Sulfur; 0.050

ASTM A519 Gr 1541 Mechanical Specifications
Tensile Strength; 1158Mpa
Yield Strength; 1034Mpa
Elongation; 15%
Reduction in Area; 53%

Product Details:

ASTM A519 Gr 1025 specification covers several grades of carbon & alloy steel seamless mechanical tubing. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade. AISI 1025 Pipe is a low medium-carbon alloy appropriate for general engineering & construction applications. Offering good machinability.

ASTM A519 Gr 1025 Applications
Building Sections
Machinery parts
Tool & die applications
Construction components

ASTM A519 Gr 1025 Chemical Composition
Carbon; 0.22-0.28
Manganese; 0.30-0.60
Phosphorus; 0.040max
Sulfur; 0.050max
Silicon; 0.15-0.30
Iron; Bal

ASTM A519 Gr 1025 Mechanical Properties

Product Details:

Aesteiron Steels Pvt Ltd, is ASTM A519 Grade 1524 Carbon Steel Tube Suppliers in India. ASTM A519 Gr 1524 Carbon Steel Tube are Low Carbon Steel Tubings with 0.19-0.25% carbon content with combination of 1.35-1.65% manganese. 

ASTM A519 Gr 1524 Chemical Composition
Carbon; 0.15-0.25
Silicon; 0.10-0.35
Manganese; 1.30-1.70
Nickel; 0.040max
Chromium; 0.25max
Sulfur; 0.06max

ASTM A519 Gr 1524 Mechanical Properties
Tensile Strength Mpa; 650-880
Yield Strength Mpa; 350-550
Elongation; 8-25%

Product Details:

Aesteiron Steels Pvt Ltd, is the supplier of ASTM A519 Gr 1022 Tube is a low carbon steel tubing with 0.18-0.23% carbon content with combination of 0.70-1.00% manganese. It is also known as mild steel tubes. ASTM A519 Gr 1022 Carbon Steel Tube is low cost tubing easy to form & shape.

ASTM A519 Gr 1022 Chemical Composition
Carbon; 0.18-0.23
Manganese; 0.70-1.00
Phosphorus; 0.040max
Sulphur; 0.050max

Product Details:

Aesteiron Steels Pvt Ltd, is the known ASTM A519 Gr 1026 Tube Stockist. It has features like better efficiency, flawless performance & reliability. ASME SA519 Gr 1026 is typically used for Oil & gas industries, petrochemical industries, marine industries & food processing industries.

ASTM A519 Types
A519 GR.1026 Cold drawn Seamless Steel Tube Exporter
1026 ASTM A519 Carbon Steel Mechanical Tube
ASTM A519 Steam Boiler Tubes Stockholder
ASTM A519 GR.1026 Carbon Steel Seamless Tubing Stockist
SA519 / A519 GR.1026 Boiler Tubes

ASTM A519 Gr 1026 Chemical Composition
Carbon; 0.22-0.28
Manganese; 0.60-0.90
Phosphorus; 0.040max
Sulfur; 0.050max

ASTM A519 Gr 1026 Tensile Strength
Tensile Strength; 490Mpa, 71100psi
Yield Strength; 415Mpa, 60200psi

Product Details:

Aesteiron Steels Pvt Ltd, is the supplier of ASTM A517 Gr 1022 Tube is a low carbon steel tubing with 0.18-0.23% carbon content with combination of 0.70-1.00% manganese. It is also known as mild steel tubes. ASTM A519 Gr 1022 Carbon Steel Tube is low cost tubing easy to form & shape.